Technical / Service Information

• Actuation Sizing Charts
• Electric Sizing Form
• HP Series Butterfly Actuation Sizing Chart
• MC Series Electric Actuator IOM
• MC Series Pneumatic Actuator IOM
• MC Series Pneumatic Actuator IOM (New Series)
• Pneumatic Sizing Form
• Solenoid IOM

• BA300/350 IOM
• Insulator/MS® Handle IOM
• Locking Stem Extension Bronze Ball Valve IOM
• Two Piece Solder Ball Valve IOM
• Two Piece Threaded Ball Valve IOM

• 10 Series IOM
• 20 Series IOM
• 35 Series IOM
• 41 Series IOM
• F20 Maintenance Manual
• F20 Top Works
• NXT Seats F20, F90, F91, 20 & 35 Series

• Butterball Wiring Diagram

• HP Butterfly Engineering Data (Flange Bolting, Operating Torque, Cv Data)
• HP Butterfly Handle Mounting Kit IOM
• HP Butterfly IOM
• HP Butterfly Seat Replacement
• HP Butterfly Accessories

• 14″ – 24″ Dead End Capability Notice (Valves Produced 2001 and Earlier)
• Butterfly Features and Options
• Chemical Resistance Guide
• Engineering and Elastomer Guide
• Flange Bolting
• Flow Coefficient
• Flow Sizing
• Instructions for Mounting Gear Operators on Milwaukee Valve Butterfly Valves
• Operating Torque
• Resilient Seated Butterfly IOM
• Rubber Lined Butterfly Valves used with Thermoplastic Flanges
• Rubber Lined Disc Selection
• Standard Chainwheel & Guide

• ABS Type Approval – CL Series
• ABS Type Approval – CW Series
• ABS Type Approval – HL Series
• ABS Type Approval – HW Series
• ABS Type Approval – ML Series
• ABS Type Approval – MW Series

• Standard Chainwheel & Guide

• Conflict Minerals Act

• Conversion Table

• Copper Water Tubing

Check Valve Flow Velocity Calculator

Pressure Drop & Cv Calculator

• Check Valve Cracking Pressure MVTB-23-001
• Check Valve Minimum Velocity and Installation Location Guidelines MVTB-21-001

• Cast Iron Gate, Globe, & Check IOM
• Cast Iron Silent Check Valve IOM
• Flange Dimensions
• Pressure Temp Chart Iron Gate, Globe, & Check
• Standard Chainwheel & Guide

• Bronze Gate, Globe, & Check IOM
• Pressure Temp Chart Bronze Gate, Globe, & Check

• Chainwheel Sizing Guide
• Cast Steel IOM
• Flange Dimensions
• Pressure & Temperature Data
• Taps & Drains

• How to Identify UltraPure® Products
• Lug Butterfly IOM
• Three Piece Ball Valve IOM
• Top Ten Tips for Low Lead Compliance
• UltraPure® Bronze Gate, Globe, & Check IOM
• UltraPure® Solder Ball Valve IOM
• UltraPure® Soldering Considerations
• UltraPure® Threaded Ball Valve IOM

• Oxygen Cleaning Procedure

• Physical and Chemical Properties of Valve Alloys

• Frequently Asked Questions
• Press-Fit Tool Compatibility

Pressure Drop & Cv Calculator

• Pipe Dimensions - Standard & Extra Strong

• New MC Series Pneumatic Actuators

• Brass or Bronze: Minimize Life Cycle Cost
• Selecting The Correct Valve Material - Bronze vs. Brass

• Return Goods Policy

• Soldering Technique

• Specific Gravities of Fluids

• Steam Temperature Pressure Table

• Ball Valve Seat Rating Chart MVTB-01-001
• Ball Valve Seat Selection MVTB-02-001
• Installing BA350TE MVTB-03-001
• Socket Weld Valve Installation MVTB-06-001
• UltraPress® Release Notes MVTB-07-001
• Vented Ball Option for Ball Valves MVTB-22-001

• Butterfly Valve Liner for Hydrocarbon Service MVTB-20-001
• Butterfly Valve Liner - Unleaded Gas MVTB-06-003
• Installing and Setting the Memory Stop on Butterfly Valves MVTB-20-003
• Rubber Lined Butterfly Valves used with Thermoplastic Flanges MVTB-14-001

• Check Valve Cracking Pressure MVTB-23-001
• Check Valve Minimum Velocity and Installation Location Guidelines MVTB-21-001
• Gate Valve Installation and Leakage MVTB-05-001
• Hot Tapping MVTB-20-002

• Buried Service Valves MVTB-02-003
• Dissimilar Metals and Piping MVTB-04-001
• Repacking of Valves MVTB-02-002
• Valve Seat Leakage MVTB-06-002

• Truck Flange Standards

• MSS ASME Valve Summary - 1

• Water Properties